 |
This miniature step adjustable hand crimping
tool produces an 8 indent crimp configuration and will 2 crimp
wire sizes 20 AWG (0.5mm ) 2 through 32 AWG (0.3mm ) |
| To crimp female contacts, order contact
positioner 9502-3. To crimp male contacts, order contact positioner
9502-4. Each positioner is equipped with a data plate which
gives the correct crimp-depth setting for each wire size and
must be used with 9507 tool frame for best results when crimping
ODD Series contacts. |
Insertion/Removal Tool (M81969/1-04)
 |
One end of this tool is used to insert contacts
into ODD Series connectors. The other end is used to extract
contacts. This is accomplished by sliding the extraction tip
down the wire into the connector until it bottoms against the
contacts. A slight rotation while pushing will release the contacts,
which are then extracted by simultaneously pulling on the wire. |
|
